INDUSTRIAL VENTILATION DESIGN GUIDEBOOK
Numbers in parentheses indicate the chapter(s) containing the author’s contribution(s).
Larry G. Berglund (5) Department of Architecture, Faculty of Engineering, Tohoku University, Sendai 980-77 AOBA Japan
Bernhard Biegert (1, 2, 10) University of Stuttgart IKE-LHR, Stuttgart, D-70550, Germany Lorraine Conroy (10) Environmental 8c Occupational Health Sciences, University of Illinois at Chicago, Chicago, Illinois 60612 Vincenzo Corrado (11) Dipartimento di Energetica del Politecnico di Torino, Facolta di Architettura, Torino 1-10100, Italy Eric F. Curd (4, 9, Appendix) Liverpool — John Moores University, West Kirby Wirral L48 8BJ, UK Lars Davidson (11) Chalmers University of Technology, Gothenburg, Sweden Viktor Dorer (11) Section 175, EMPA, Diibendorf CH-8600, Switzerland Antonio Dumas (10) Dipartimento di Ingegneria Energetica, Nucleare e del Controllo Ambientale, Universita di Bologna, Bologna 1-40136, Italy
Mamdouh El Haj Assad (4, 8, 9) Laboratory of Applied Thermodynamics, Helsinki University of Technology, Espoo FIN-02015 HUT, Finland Michael Ellenbecker (10) Department of Work Environment, University of Massachusetts, Lowell, Massachusetts 01854
Jan Emilsen (9) Johnson Controls Norden AS, Tiller N-7075, Norway
Bernard Fletcher (10) Health and Safety Laboratory, Sheffield S3 7HQ, Great Britain
XX CONTRIBUTORS
Richard R Garrison (10) Department of Environmental Health Sciences, School of Public Health, University of Michigan, Ann Arbor, Michigan 48109
Howard D. Goodfellow (10, 13) Department of Chemical Engineering and Applied Chemistry, University of Toronto, Toronto, Ontario, Canada M5S 3E5
Mario Grau-Rios (6) Instituto Nacional de Higiene у Seguridad eti el Trabajo, Madrid E-28071, Spain Jan Gustavsson (9) Camfil Ab, Trosa S-61933, Sweden Kim Hagstrom (3, 6, 8) Faculty of Mechanical Engineering, Helsinki University of Technology, Espoo FIN-02015 HUT, Finland TimoHautalampi (8) Turku Regional Institute of Occupational Health, Turku FIN-20520, Finland
Jaap Hogeling (9) ISSO, 3000 BV Rotterdam, The Netherlands Derek Ingham (10, 13) Department of Applied Mathematics, University of Leeds, Leeds LS2 9JT, United Kingdom Pentti Kalliokoski (5) Department of Environmental Sciences, University of Kuopio, Kuopio FIN-70211, Finland Jonathan W. Kaufman (5) Naval Air Warfare Center, Patuxent River, Maryland 20670 ’
Markus Koschenz (11) Section 175, EMPA, Dubendorf CH-8600, Switzerland Hannu Koskela (8) Turku Regional Institute of Occupational Health, Turku FIN-20520, Finland
Ilpo Kulmala (10) VTT Automation, Tampere FIN-33101, Finland Markku Lampinen (4, 14) Laboratory of Applied Thermodynamics, Helsinki University of Technology, Espoo FIN-02015 HUT, Finland Ulf Landstrom (5) National Institute for Working Life, Umea S-907 13, Sweden Matti Lehtimaki (13) VTT Automation, Tampere FIN-33101, Finland Bengt Ljungqvist (10) Building Services Engineering, KTH, Stockholm S-10044, Sweden
Albrecht Lommel (10) Wald, Switzerland (formerly of Swiss Federal Laboratories for Materials Testing and Research, EMPA)
Sante Mazzacane (9) Department of Architecture, Universita di Ferrara, Ferrara 44100, Italy
Domingo Moreno-Beltran (6) Escuela Tecnica Superior de Ingenieros Industrials, Universidad Politecnica de Madrid, Madrid E-28006, Spain
Alfred Moser (11) Swiss Federal Institute of Technology ETH, Department of Architecture, Air and Climate Group, Zurich, Switzerland
Elisabeth Mundt (7) KTH, Royal Institute of Technology, Stockholm S-10044, Sweden
Peter V. Nielsen (12) Department of Building Technology, Aalborg University, Aalborg DK-9000, Denmark
Raimo Niemela (6) Department of Physics, Finnish Institute of Occupational Health, Vantaa FIN-01620, Finland
Lars Olander (6, 8,10) Building Services Engineering, KTH, Royal Institute of Technology, Stockholm S-10044, Sweden Bjarne W. Olesen (6) Wirsbo-Velta GmbH, D-22851 Norderstedt, Germany Leena Perttu-Roiha (13) Fortum Oil and Gas Oy, Porvoo, Finland Vladimir Posokhin (7) Kazan State Architechtural-Construction Academy, Tatarstan, Russia
Jorma Railio (1, 2, 9) Association of Finnish Manufacturers of Air-Handling Equipment, AFMAHE, Helsinki FIN-00130, Finland Mike Ratcliff (7) Rowan Williams Davies & Irvin Inc., Guelph, Ontario, Canada
Berit Reinmiiller (10) Building Services Engineering, KTH, Stockholm S-10044, Sweden
Michael Robinson (10) Division of Mathematics, School of Science and Mathematics, Sheffield Hallam University, UK Gunnar Rosen (10, 12) Department of Work Organisation Research, National Institute for Working Life, Solna S-171 84, Sweden Sakari Sainio (16) Espoo-Vantaa Institute of Technology, Espoo, Finland Esa Sandberg (8) Satakunta Polytechnic, Pori FIN-28600, Finland
Kai Savolainen (5) Department of Industrial Hygiene and Toxicology, Finnish Institute of Public Health, Helsinki FIN-01620, Finland; and Department of Environmental Medicine, National Public Health Institute, Kuopio FIN-70701, Finland
Alois Schalin (11) Air Flow Consulting Alois Schalin, afc, CH-8092 Zurich, Switzerland
Eugene Shilkrot (7) TSN 11 Promsdanii, Thermec, Moscow 127238, Russia
Kai Siren (12) Helsinki University of Technology, HVAC Laboratory, Espoo FIN-02015 HUT, Finland "
Petri Sjoholm (13) Laboratory of Energy Economics and Power Plant Engineering, Helsinki University of Technology, Espoo FIN-02015 HUT, Finland
Hakon Skistad (7, 8) SINTEF Energy Research, Refrigeration, and Air Conditioning, Trondheim N-7034, Norway Bengt Steen (15) Department of Environmental Systems Analysis, Chalmers University of Technology, Gothenburg, Sweden Andrey Strongin (7) TSN II Promsdanii, Thermec, Moscow 127238, Russia Esko Tahti (6) Finnish Development Centre for Building Services LTD, Helsinki FIN-00120, Finland Per Olaf Tjelflaat (8) Department of Refrigeration and Air Conditioning, NTNU, Norwegian University of Science and Technology, Trondheim N-7034, Norway
Heikki Torvela (13) Centre for Environmental Technology, Meri-Lappl Institute, University of Oulu, Oulu, Finland Katsuhiko Tsuji (10) College of Integrated Arts & Sciences, Osaka Prefecture University, Sakai, Osaka 599-8531, Japan
Posted in INDUSTRIAL VENTILATION DESIGN GUIDEBOOK